Studebaker

 

 

Rust Repair Body Panels and Body Parts for Studebaker Vehicles

We produce Repair Parts & Panels including Floor & Trunk Pans, Rocker Panels, Floor Supports, Structural Components & a wide assortment of related Body Parts & Panels for Studebaker Cars & Trucks.

 

 

Shipping Information---

Find your vehicle type and click on Shipping Information

stude

 

Greetings and Congratulations!

It appears that you intend to put a unique piece of history back on the road again! A growing number of people would agree that you are making a wise decision. Studebakers are becoming more popular with collectors each year. Thus, the value of your Studebaker will grow quite rapidly.

There is no other car that typifies mid-fifties nostalgia more than late 40's and early 50's Studebakers. Few postwar trucks could match the unique styling, simplicity, and durability of the C-Cab pickup. Detroit and Japan took years before they could match the style silhouette of the T-Cab pickup and the advanced styling and economy of the Lark. There are likewise no other 50's or 60's cars that could match the sheer power or quiet grace of a Coupe/Hawk or Avanti.

We take pride in assisting you in saving a Studebaker from the ultimate meltdown. Take the initiative in preserving a unique and endangered species of automobile for future generations to enjoy. We like your style.


What's New From Classic Enterprises

NEW '47-'52 Studebaker Rocker Panel Trim Moldings

'47-'52 Rocker Panel Trim Moldings

We now produce exceptional quality '47-'52 Rocker panel trim moldings in show-quality high-luster stainless steel. You may order in 2-door, 4-door, or cruiser lengths. Our moldings are an ideal replacement for dented, creased, or generally tarnished original moldings!

You might also consider that our moldings would be a great addition to your unadorned Stude and will definitely add a lot of extra snap and class to the look of an already cool-looking car. Molding clips and installation instructions are included.

Money back guarantee if not completely satisfied.

Introductory Offer:


HIGH LUSTER STAINLESS STEEL ROCKER MOLDINGS FOR ALL '47-'52 2-DOOR, 4-DOOR, CONVERTIBLE, AND '51-'52 LAND CRUISER TYPES
$450.00/car


---------------------

HIGH LUSTER STAINLESS STEEL ROCKER MOLDINGS FOR ALL '47-'50 LAND CRUISER TYPES
$450.00/car


---------------------

HIGH LUSTER STAINLESS STEEL 'SPEAR POINTS' FOR ALL '47-'50 LAND CRUISER TYPES
$150.00/car


*Note that we can not assure our customers of the future availability of our rocker moldings. It is unknown how long our tooling and formers will stand up to the rigors of stainless steel formation.

If insufficient interest in the moldings exist at the time of tooling breakdown and inventory depletion, we shall discontinue rocker molding production and focus our attention to the development of other products.

Therefore it might be in your best interests to anticipate your future need just in case.

Note also that our price is a temporary introductory offer. Our intent is to offer the moldings at a discounted price in order to maximize the exposure of our product.

Our offer will remain in place until the first 25 sets of rocker moldings have been sold. We have an exceptional product and hope to be of service to you!

-LAMONTE
CLASSIC ENTERPRISES

NEW Studebaker GT Hawk Aluminum Rocker Moldings
GT HAWK

GT Hawk Aluminum Rocker Moldings

Greetings Studebaker People!!

Our Limited stock of GT Hawk Aluminum Rocker Moldings are available in both a freshly anodized bright aluminum showroom finish or in a very limited quantity of matte finished gold for custom use. Both types are of exceptional quality and are intended for 1962-1963 and 1964 GT types but will fit all CK’s from 1953 to 1964. They can also be special ordered for all 1953-1960 sedan types to give your car a very distinct and classy look.

The moldings can also be made to work as side panel trim on ‘56 Hawks. Our Rocker Moldings will also fit a surprising number of modern cars, SUV’s and pickups that have the same approximate rocker height and profile. Late model Cadillac’s, Mustangs and Ford pickups are few examples.

BRIGHT ANODIZED ALUMINUM FINISH
------
$350 set

MATTE GOLD FINISH
-------
$475 set

Pricing Information

GT



moldings



NEW Studebaker Anti-Kink Hood Stiffeners

Anti-Kink Hood Stiffeners

FRESHLY RE-DESIGNED TO GIVE GREATER STRENGTH TO A NOTORIOUSLY KINK PRONE AREA ON ALL '53-'64 COUPES AND HAWKS AND SOME '53-'58 SEDAN TYPES.

OUR NEW DESIGN IS PROPERLY SHAPED TO YOUR HOOD EDGE CONTOUR AND WILL REINFORCE THE KINK PRONE AREAS FOR A LENGTH OF 23".

NEW HOOD RETURN SPRINGS ARE AVAILABLE UPON SPECIAL REQUEST...(715) 537-5422.

(Installation instructions included with purchase)

anti kink


$85 per car

ADD

anti kink

New Hood Return Springs

At least one half of a century has gone by since your original hood springs were new. It is pretty well guaranteed that they may be somewhat weakened by now. A change and update may well be in order!
studebaker

$50 / set of four (4)

ADD




return springs
New Product - Studebaker Splashguard

 

   For All Studebaker Coupe & Hawk Types

         

                          Two angles shown above

CK brake & clutch pedal, dimmer switch & master cylinder splash guard for all '53-'64 Coupe/Hawk types. A very nicely done reproduction in fiberglass which reduces road noise & will never rust out.(Marks for bolt holes will be clearly visible). $125.00 each Call, mail or e-mail your order in. Please add 10% for shipping & handling.

top

Hey!!!!-----M-Series Studebaker Pickup Floor Panels & Cab Corners (1941-1947) are now available---Nicely die formed panels in #18 gauge steel as was original. Outside and toe-board edges are rolled down. A one inch roll up is formed at the rear edge of the panel. A properly shaped upward bulge is formed at the "flat" of the panel as was original. Floor Panels now include captured nuts for transmission cover hold-down bolts and side to side panel joiner (not shown).

$125 each

     
M-Series Cab

Corners

Cab Corners and Inner Cab Corners are now available. Driver & passenger sides shown at right. Lower side & rear edges are purposely left untrimmed to allow you more flexibility in placement while fitting the panel. Do your final trim after welding is complete. (Tooling has recently been adjusted for improved panel detail).

Cab Corners

$95 each

Inner Cab Corners

$20 each

 

 

 

 

Specialty License Plates - Just For Fun!

License Plates

Custom license plates in an original Studebaker script that is so old it's new. Great for show, car display, wall hanging, a gift, or general collection. Great for club distribution as well.

Color options: Red Garnet, Light Emerald Green and Cobalt Blue.

  • $20.00 each plus $5.00 shipping & handling for orders of 1-9 plates.
  • Free shipping on orders of 10 or more. (Mix colors if you like.)

Call, write, fax your order, or order online by clicking "Add to Cart" below.

Be sure to specify color when ordering!

Classic Enterprises 715-537-5422

New Product - Studebaker Tailgate

 

Tailgate

Our new tailgate is shown in the photo above. The product is made for the 48 1/2" Studebaker box. Our tailgate is of double wall construction in heavy #16 gauge steel. Exceptional detail in raised lettering and obround stamping on reverse side. We can omit the chain hook eye for a full custom look if requested. Hinge pivot pins and attachment screws are included. Give us a call. More information in pickup section.

 

top

What's New

Hawk Fin Strip Molding, T-Bolts and Nuts are NOW AVAILABLE
($35 each + 10% shipping & handling.)

   C & T-Cab Pickup Box Floors

   Structural Supports

   Rear Box Valences

   Side Panels

   Fender Support Baffles

   Side Panel End-Caps

   M-Series Box Floors

The above items are NOW AVAILABLE. Our box floors can be successfully fitted into a previously restored pickup if desired. Contact us for details.


top


Shipping Information

Add 20% shipping to all orders under $150.00 and 10% to all orders of $150.00 or more for all lower 48 states domestic orders. Personal or company checks are accepted, as are VISA, MasterCard, American Express and Discover. Most orders are shipped via UPS. For all UPS domestic C.O.D. orders add 20% to the total.

Non-domestic, Alaskan and/or Hawaiian orders can not be placed on line via our shopping cart. You will not be able to use the cart because the shipping charges on the cart are based on continental US shipping costs. We are unable to predict specific shipping cost for non-domestic order and are thus unable to quote shipping estimates. Such orders will be shipped at actual cost plus 5% of the value of the order for special handling. You must place your order via Master/Visa/Discover or American Express by Mail, Fax, E-mail or phone (715-537-5422). Sorry, checks or their equivalent can not be accepted. Be sure to include your telephone number and e-mail address (if available). Include your carefully recorded card number with the proper expiration date and the three digit code from the back of the card, or four digit code from the front of the American Express card. (Because of language problems we prefer that you submit your order via mail, fax or e-mail.) Click here for order form for fax or mail orders. Note that non-USA customers placing orders to be shipped to a USA address may not be able to order on line and may have to mail, fax, e-mail or telephone their order to us. Such orders will be shipped to a continental USA address at our standard shipping rates.

Call or order anytime, including weekends; someone is usually in the office. Any product may be returned for a full refund within 30 days of receipt. Refund does not include shipping costs.

WE HOPE THAT YOUR PROJECT GOES WELL-CLASSIC ENTERPRISES

Shipping Policy

Classic Enterprises is a manufacturing facility and factory direct outlet. We do not maintain a large inventory of any one particular item and thus are not always stocked with all of the items which you may need. Non-inventoried items are made to order in the order in which the order was received.

Normal shipping time from our facility is 7 days or less. Sometimes it may take a week longer for certain items. We ship via UPS or FEDEX Ground, which contrary to legend or exaggeration, can take as long as 7 days for delivery. If your order does not arrive within 20 days of order placement, give us a call and we will check the status of your order or furnish you with a tracking number at that time.

Thank you in advance for your patience and consideration.

LaMonte - Owner of Classic Enterprises

 

 

top

How To Order

MAIL: Click here for order form for fax or mail orders.
PHONE: You may also call or fax your order in. Call (715) 537-5422 anytime 24/7, or FAX your order to (715) 537-5770.
ONLINE: To order online, simply click on the "Add to Cart" buttons above next to your desired product, and it will automatically redirect you to the shopping cart.

payment options

FordJeepStudebakerdodge | About Us | Contact Us | Guarantee | Home | ©2014 Classic Enterprises Classic Enterpises Logo