Avanti Studebaker Ford Dodge Jeep
Autobody Parts and Panels, Proudly Made in the USA

'59-64 Studebaker T-Cab, Champ Pickups

Studebaker pickup

'59-'64 Studebaker Champ Truck, T-Cab Floor Panels

Our Floor Panels are 22" wide and extend from the firewall seam to the cab corner in length. Our die stamped panel is manufactured in heavy 18 gauge steel. Note that our Floor Panel thresholds are properly formed and are arched front to rear just like the original floor panel which will allow for proper Rocker Panel placement and the maintenance of original body shape and proper door fit upon completion.

All panels are dimensionally proper and sold as shown in the photograph. Panels may have to be modified during installation to suit application.

Add to Cart $180.00 Driver

Add to Cart $180.00 Passenger

Add to Cart $360.00 Pair



'59-'64 Studebaker Champ Truck T-Cab Floor Mount Reinforcement Washers

Companion to Floor Panels shown above.Reinforces floor area where floor panel bolts to frame. Yes there is a Driver and a Passenger and both are sides available.

Add to Cart $15.00 Driver

Add to Cart $15.00 Passenger



'59-'64 Studebaker Champ Truck T-Cab Door Skins

Made in 18 gauge steel 5" high by full length. Front and lower edges are rolled as original; upper edge is flanged for flush fit.

Add to Cart $45.00 Driver

Add to Cart $45.00 Passenegr


'59-'64 Studebaker Champ Truck T-Cab Rocker Panels

Our rocker panels have pre- formed weatherstrip channels and are properly arched from front to rear just like the originals which will allow for the maintenance of proper body shape, proper door fit and general ease of installation. Made of original gauge steel.

Add to Cart $155.00 Set     









'59-64 Studebaker Champ Truck T-Cab Rear of Front Fender Patch 

Made from 18 gauge Steel and full length by 4 1/2" wide. Rolled rear edge and flanged front edge for flush fit.

Add to Cart $75.00 Driver

Add to Cart $75.00 Passenger


'59-'64 Studebaker Champ Truck T-Cab Pickup Box Panels

Box Panel layout shown at right. The following parts in the sketch are listed below with pictures.



 '59-64 Studebaker Champ Truck T-Cab  Rear of Box Valance

Our die stamped C-Cab rear valance panel is an exceptional representation of the most common valance used by Studebaker. Our product is properly formed and fits directly below the tailgate of all Studebaker type pickup boxes.

Add to Cart $105.00 each

'59-'64 Studebaker Champ Truck T-Cab Forward Box End Panel

Now completely die formed in original 16 gauge steel with properly curled upper edge. An exceptional product. Two widths available.

Add to Cart $180.00 Width 48 1/2 Inches

Add to Cart $180.00 Width  51 1/2 Inches 

box end panel

'59-64 Studebaker Champ Truck T-Cab Box Floor

We have an exceptional Studebaker box floor for you.  Our product is die stamped in heavy 16 gauge steel which was original to the vehicle.  Our panel overlaps at the center which was typical of the Studebaker box floor.  We provide a one inch 90 degree upturn at both outside edges which aids in proper installation.  (You may special order a box floor without the 90 degree upturn for use as an "overlay" if you wish). * Note that our box floors are not intended for T-Cab type "Dodge" boxes.  

****There is an additional $95.00 UPS oversize surcharge that is added to our normal 10% shipping charge.

Add to Cart $475.00 each


Add to Cart $26.00  Studebaker SunGlasses 

 '59-'64 Studebaker Champ Truck T-Cab Box Floor Supports

Proper gauge steel for both wide & narrow Studebaker Boxes.

(Not available for T-Cab Dodge Boxes).


Add to Cart $75.00 Front      48 1/2"

Add to Cart $75.00 Middle    48 1/2"

Add to Cart $75.00 Rear       48/ 1/2"


Add to Cart $75.00 Front     51 1/2"

Add to Cart $75.00 Middle   51 1/2"

Add to Cart $75.00 Rear      51 1/2"




  Front and rear of box supports Two views shown above


    Middle box floor support Two views shown above

 '59-64 Studebaker Champ Truck T-Cab Pickup Box Side Panels

Front of rear fender panelsp roperly formed in 18 gauge  steel.


Add to Cart $35.00 1/2 Ton Driver

Add to Cart $35.00 1/2 Ton Passenger


Add to Cart $35.00 3/4 Ton Driver

Add to Cart $35.00 3/4 Ton Passenger

 '59-64 Studebaker Champ Truck T-Cab Rear of Rear Fender Panels

Properly formed in 18 gauge  steel.

Add to Cart $35.00 1/2 Ton Driver

Add to Cart $35.00 1/2 Ton Passenger


Add to Cart $35.00 3/4 Ton Driver

Add to Cart $35.00 3/4 Ton Passenger


 '59-'64 Studebaker Truck Champ T-Cab Side Panel Splash Guards- Baffles

Properly die formed in original 18 gauge steel. (4 per truck was original)

Add to Cart $15.00 each

Add to Cart $60.00 Set of 4



'59-64 Studebaker Champ Truck T-Cab Front Side Panel End Caps

Properly die-formed. None of our panels are cosmetically coated. 

Add to Cart $45.00 Driver Front

Add to Cart $45.00 Passenger Front


Add to Cart  License Plate $20.00


 '59-'64 Studebaker Champ Truck T-Cab Rear Side Panel End Caps

Properly die-formed.

Add to Cart $45.00 Driver Rear

Add to Cart $45.00 Passenger Rear


Add to Cart $26.00  Studebaker SunGlasses 



 '59-'64 Studebaker Truck T-Cab Custom "SMOOTHIE" Reversed End Caps

For a smooth custom look , looks great with our custom tailgate.

Add to Cart $110.00 pair

Add to Cart  License Plate $20.00


'59-64 Studebaker Champ Truck Swing-Away Pickup Tail Light and Stop Light Assembly

Swing-away pickup tail & stop light assembly spring loaded action which was original to the vehicle. Driver side with license plate bracket as shown. Mirror image assembly is available for the passenger side which allows the option of an extra brake and tail light plus a signal light system. A very good quality reproduction.


Add to Cart $80.00 Swing Away Tail Light Assembly

Add to Cart $15.00 License Plate Bracket

Add to Cart  License Plate $20.00  

'59-'64 Studebaker Champ Truck T-Cab Rear Fenders

We have very good quality rear fenders available for your Stude pickup.  Our product is manufactured in very carefully hand laid fiberglass with extra wall thickness built in which  makes for a very solid fender.  Our fenders can save you countless hours of time trying to repair your original.    I think that you will be pleased with what you see. ***SPECIAL SHIPPING SURCHARGE APPLIES Call For quote 715 537 5422*** 

Add to Cart $375.00 Driver

Add to Cart $375.00 Passenger


Rear Fender

Studebaker C Cab, R & E Series  Rubber Rear Fender Gravel Guards

Protect your fenders with our rubber rear fender guards. They are for all 49-64 Studebaker Box Pickups.Screws are included. Not for Dodge boxes

Add to Cart $105.00 Per Pair


 Studebaker rocker panel trim

Studebaker Champ Truck T-Cab  Box Spare Tire Well & Complete Mounting Kit 

Add a cooler and sportier look to your already cool and sporty looking Studebaker pickup and put your spare tire in a place that you can easily get to if and when you need it. Our spare tire well is a very good reproduction of the original and can be added to any standard passenger side C-cab Stude R&E series truck rear fender or any Stude box T-cab Champ rear fender. Complete cutting and installation instructions are included along with all the original type mounting hardware that will make for a great looking job.

Add to Cart $150.00 each

            mount kit

mount mold exmaple       


None of our panels are cosmetically coated.  Click here to find out why.  

mounting kit 

'59-64' Studebaker T Cab Champ Pickup Spare Tire Washer



Add to Cart $15.00 Spare Tire Washer Hold Down

Custom Show Display End Caps For All C and T Cab Studebaker Boxes

    Custom Show Display End Caps

Our new lens kit is designed to form a flush surface across the recessed side panel end of any Studebaker type pickup box. The kit includes two striking translucent red end cap covers. Two specially manufactured "Lazy S" shadow shields with light refractors, chunky silver glitter flakes, screws, stand-offs, spacer gasket, sockets & 6 wide angle LED bulbs plus instructions. A very impressive setup.



Add to Cart $260.00 For Complete Kit


Chain or padlock tailgate latching system shown at right. Photographically enhanced and reversed view of lens for internally latched tailgate system shown at right.                

Left                       Right

Studebaker Custom Tailgate for T Cab Champ with Studebaker Box

We have an exceptional die stamped tailgate with double wall construction in heavy #16 gauge steel avalible for you, (48 1/2" width available only). Raised Studebaker script lettering on outer face & obround raised detail stamped on reverse side of tailgate. Hinge pins and screws included. Have any leftover paint? Who says that you can't have an original tailgate for authenticity and our custom tailgate for "cruzin". Studebaker script specialty panels available for display purposes upon special order.

Add to Cart $650.00 each



Studebaker Script Stamped Panel

Our heavy 16 gauge die stamped panel is ideal as a wall hanging in a Man Cave, a patio bench backrest, a panel for the face of an office desk or as an overlay for a damaged original Stude pickup tailgate.  Our panel size is 17 3/4" X  49".  The quality of our stamping is exceptional.

Add to Cart $250.00 Script Stamping


Studebaker Sunglasses by Classic Enterprises

A very limited stock of special "AVIATOR  STYLE" sunglasses with gold STUDEBAKER script is still available.  Put them on and you will be guaranteed to look and feel at least 20 years younger when "Cruisin" in your favorite Stude.  ----Honest---

Add to Cart $26.00  Studebaker Sunglasses


Shipping / Ordering Information


USA Orders

All domestic lower 48 USA orders are shipped at a *(minimum of $15.00 on orders $75.00 or less) and *(20% shipping to all orders over $75.00 and under $150.00) and *(10% to all orders of $150.00 or more).  When ordering by mail we will accept personal, company or cashiers checks and all major types of credit cards. When ordering via fax all major types of credit cards will be accepted. Be sure to carefully record your card number, expiration date and security code. Top credit card security is strictly maintained by us. Click here for a printable order form. For your fastest service you may order on-line.

Foreign / Alaskan-Hawaiian Orders

Foreign can be placed on-line if we are to ship your order to an address anywhere in the USA. In such cases our standard shipping charges will apply. Orders that are to be shipped to foreign countries, Alaska or Hawaii will require a special shipping quote and are not to be placed on-line. You may simply fax or e-mail us your anticipated order and complete shipping address along with your telephone/fax number. We will then provide you with a shipping quote according to your shipping preference if you have one. We will also provide you with further ordering information at that time. All foreign, Alaskan and Hawaiian orders, once confirmed, are to be placed via credit card only. Click here for a printable order form if needed.

Ordering Option Information

Mail Orders

Classic Enterprises

308 W Stout Street

Rice Lake Wi, 54868

Click Here for printable order form if needed or simply write down your order and your other information on whatever paper you choose.

Direct Telephone Orders or Information

 715 537-5422 Call anytime 24/7 with questions or an order.

Secure E-Mail Orders

E-Mail us at Mark@ClassicEnt.com or Click here for printable order form which you can scan and submit via jpg format or simply send your order description to us via a text format.

On-Line Orders

www.ClassicEnt.com For your fastest service.

Main Office Phone # 715 537-5422


Shipping Policy

Classic Enterprises is a manufacturing facility and factory direct outlet. We do not maintain a large inventory of any one particular item and thus are not always stocked with all of the items which you may need. Non-inventoried items are made to order in the order in which the order was received.

Normal shipping time from our facility is 7 days or less. Sometimes it may take a week longer for certain items. We ship via UPS or FEDEX Ground, which contrary to legend or exaggeration, can take as long as 7 days for delivery. If your order does not arrive within 20 days of order placement, give us a call and we will check the status of your order or furnish you with a tracking number at that time.

Return Policy

Any of our products can be returned for a prompt credit or refund for any reason within 30 days of the receipt of your order.  No returns will be accepted without prior approval.  All returns must include the original paperwork if available and a detailed note stating the reason for the return.  We also will require a clear return address, a telephone number and an e-mail address if available.  A 10% restock/transaction fee will be deducted from any standard refund.  An additional restock fee will be assessed on any returns that must be re-worked by us in order to be resalable.  Any products which have been  damaged or modified by the customer will  be considered to be non-returnable.  Return shipping costs are the responsibility of the customer although we will assume or reimburse all return expenses if we are in error. 

Thank you in advance for your patience and consideration.